Advertisement
7-21 CHASSIS
INSPECTION
FORK SPRING
Measure the fork spring free length. If it is shorter than the
service limit, replace it with a new one.
Service Limit :
574
mm
(22.6
in)
INNER AND OUTER TUBE
Inspect the inner tube sliding surface and outer tube sliding
surface for any scuffing.
DAMPER ROD
Move the inner rod by hand to inspect if operating smoothly.
REASSEMBL V AND REMOUNTING
Reassemble and remount the front fork in the reverse order
of removal and disassembly. Also observe the following instruc-
tions:
OIL SEAL CASE
• Install the new 0-ring
CD
onto the oil seal case after apply
grease to it.
99000-25010
:SUZUKI Super grease "A"
• Install the oil seal case to the outer tube.
CAUTION:
When installing the oil seal case to the outer tube, be careful not
to damage the 0-ring.
• Install the stopper ring ®onto the outer tube.
.t:;!idliliiiiWibuNijiiiUJiijdMiiili!iDidiiil!il
Advertisement
