Sony CPD-220GS Service Manual page 9

Customizing Your Monitor
3
Press the ¨./> buttons to select the color
temperature.
There are two color temperature modes in the OSD.
The preset adjustments are 9,300K and 5,000K.
Selecting your own color temperature between
9,300K and 5,000K
Press the ¨./> buttons to select " (VARIABLE)"
and adjust by pressing the >?// buttons.
COLOR
9300K
5000K
50
VARIABLE
/ . . . for a higher temperature (bluish)
? . . . for a lower temperature (reddish)
The OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button again.
To reset, press the RESET button while the OSD is on. The
selected color temperature is reset to the factory settings.
12
Using the SCREEN On-screen
Display
Adjust convergence settings to eliminate red or blue
shadows that may appear around objects on the screen.
Adjust the CANCEL MOIRE function to eliminate wavy or
elliptical lines that may appear on the screen.
Once the setting is adjusted, it will be stored in memory for
all input signals received.
1
Press the MENU button.
The MENU OSD appears.
MENU
2
Press the ¨./> and >?// buttons to select "
SCREEN," and press the MENU button again.
The SCREEN OSD appears.
SCREEN
26
H CONVERGENCE
3
Press the ¨./> buttons to select the item you want
to adjust.
Select To
adjust the horizontal convergence
H CONVERGENCE
adjust the vertical convergence
V CONVERGENCE
eliminate elliptical or wavy lines on
the screen
CANCEL MOIRE
*
adjust the degree of moire
MOIRE ADJUST cancellation
* CANCEL MOIRE must be "ON" for " (MOIRE ADJUST)"
to appear on the screen.
4
Press the >?// buttons to adjust the settings.
For Press
/ . . . to shift red shadows to the right
and blue shadows to the left
H CONVERGENCE
? . . . to shift red shadows to the left
and blue shadows to the right
/ . . . to shift red shadows up and blue
V CONVERGENCE shadows down
? . . . to shift red shadows down and
blue shadows up
/ . . . to turn CANCEL MOIRE "ON"
CANCEL MOIRE
OFF ON
? . . . to turn CANCEL MOIRE "OFF"
OFF ON
/ . . . to increase the moire cancellation
effect
MOIRE ADJUST
50
? . . . to decrease the moire cancellation
effect
0
The OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button again.
To reset, press the RESET button while the OSD is on.
The selected item is reset to the factory setting.
Getting Started Customizing Your Monitor
Using the OPTION On-screen
Display
The OPTION OSD allows you to manually degauss the
screen and adjust settings such as the OSD position and
OSD language. It also allows you to lock the controls.
Degaussing the screen
The monitor screen is automatically degaussed
(demagnetized) when the power is turned on.
You can also manually degauss the monitor.
1
Press the MENU button.
The MENU OSD appears.
MENU
2
Press the ¨./> and >?// buttons to select "
E N
OPTION," and press the MENU button again.
The OPTION OSD appears.
F
OPTION
E S
ON
C
MANUAL DEGAUSS
3
Press the ¨./> buttons to select " (MANUAL
DEGAUSS)."
4
Press the > / button.
The screen is degaussed for about 5 seconds.
If you need to degauss the screen a second time, wait for at
least 20 minutes before repeating the steps above.
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the MENU button again.
13