Advertisement
INSTRUCTIONS
1. Hang water bottle one meter above
ironing surface (Refer Bottle Hanging
Instruction).
2. Connect one end of the hose (black
colour) to the iron and the other end to
the bottle.
3. Fill in bottle with tap water only.
4. Tie the electrical cord and hose
together.
5. Plug in the iron cord into a grounded
electrical outlet.
6. Set the temperature dial at No.4 and
let the iron heat up for ten minutes.
7. Open the bottle valve and allow the
hose to fill with water by pressing the
steam switch. The iron is now ready for
use.
8. When not using, place the iron on
the supplied iron rest.
9. Always
unplug the iron when
unattended or not in use.
IMPORTANT
Do not stand iron on its back.
Advertisement
