Folding Tool; To Use The Mini Bowl And Knife; Grinding Mill - Kenwood FDM78 Instructions Manual

5 Switch on and push down evenly with the pusher - never
put your fingers in the feed tube.
hints
Use fresh ingredients
G
Don't cut food too small. Fill the width of the feed tube fairly
G
full. This prevents the food from slipping sideways during
processing. Alternatively use the small feed tube.
When using the Julienne or French fry disc, place ingredients
G
horizontally.
When slicing or grating: food placed upright
G
shorter than food placed horizontally
G There will always be a small amount of waste on the disc or
in the bowl after processing.
dl

folding tool

Use the folding tool to fold light ingredients into heavier
mixtures for example meringues, mousses and fruit fools.
1 Fit the bowl onto the power unit, add the detachable drive
shaft.
8
2 Push the paddle securely into the drive head.
3 Fit the folding tool by carefully turning until it drops over the
drive shaft.
4 Add the ingredients.
5 Fit the lid – ensuring the end of the shaft locates into the
centre of the lid .
6 Select low speed (speed 1 -2).
to remove the beater
Detach the beater from the drive head by pressing the
9
release button .
hints
Do not use high speed as a low speed is required to
G
optimise the folding performance.
For best results do not over whisk egg whites or cream –
G
the folding tool will not be able to fold the mixture correctly if
the whisked mix is too firm.
Do not fold the mixture for longer than stated in the
G
recommended speed chart as the air will be knocked out
and the mix will be too loose.
Any unmixed ingredients left on the paddle or sides of the
G
bowl should be carefully folded in using the spatula.
dm
mini bowl and knife
Use the mini processor bowl to chop herbs and process
small quantities of ingredients e.g. meat, onion, nuts,
mayonnaise, vegetables, purées, sauces and baby food.
mini blade
mini bowl

to use the mini bowl and knife

1 Fit the bowl onto the power unit, add the detachable drive
shaft.
2 Fit the mini bowl over the detachable drive shaft - ensure the
cut out sections align with the locating tabs
bowl.
Note: The main bowl lid cannot be fitted if the mini bowl is
not located correctly.
3 Place the knife blade over the drive shaft
4 Add the ingredients to be processed.
5 Fit the lid and switch on.
bm
comes out
bn
.
bo
on the main
bp
.
11
safety
Never remove the lid until the knife blade has completely
G
stopped.
The knife blade is very sharp - always handle with care.
G
important
Do not process spices – they may damage the plastic.
G
Do not process hard food such as coffee beans, ice cubes
G
or chocolate – they may damage the blade.
hints
Herbs are best chopped when clean and dry.
G
G Always add a little liquid when blending cooked ingredients
to make baby food.
Cut foods such as meat, bread, vegetables into cubes
G
approximately 1-2 cm ( 1 ⁄
2
When making mayonnaise add the oil down the feed tube.
G
dn

grinding mill

(If supplied)
Use the grinding mill for processing dry ingredients such as
nuts or coffee beans and for grinding spices such as:-
Black peppercorns, cardamom seeds, cumin seeds,
coriander seeds, fennel seeds, fresh ginger root, garlic
cloves and fresh chillies.
mill jar
grinding mill blade assembly
to use your grinding mill
1 Place your ingredients into the blade assembly
2 Fit the jar and turn clockwise to lock
3 Place the mill onto the power unit and turn clockwise to
br
lock .
4 Select a speed or use the pulse (P).
safety
Never fit the blade unit to your food processor without the
G
jar fitted.
Never unscrew the jar while the mill is fitted to your
G
appliance.
Do not touch the sharp blades – Keep the blade unit away
G
from children.
G Never remove the mill until the blades have completely
stopped.
To ensure the long life of your mill, do not run it continuously
G
for longer than 60 seconds. Switch off as soon as you have
got the right consistency.
The appliance will not work if the mill is incorrectly fitted.
G
Do not process turmeric root in the mill as it is too hard and
G
may damage the blades.
hints
For optimum performance when processing spices we
G
recommend that you do not process more than 50g at a
time in the mill.
Whole spices retain their flavour for a much longer time than
G
ground spices so it is best to grind a small quantity fresh at
a time to retain the flavour.
To release the maximum flavour and essential oils whole
G
spices are best roasted prior to milling.
Cut ginger up into small pieces before processing.
G
For best results the mini bowl attachment is recommended
G
when chopping herbs.
– 3 ⁄ in) before processing.
4
.
bq
.