For security purpose, “WPS (PIN)” provides a
PIN code for your router. PIN code is renewed
every time you select “WPS (PIN)”.
1
Press HOME, then select
>
“Network” > “Network Set-up”.
2
Select “Wireless Set-up”.
3
Select “WPS (Push Button)” for Push
Button method or “WPS (PIN)” for PIN
method.
~
• Button name of the WPS may differ depending
on the router (e.g. AOSS button).
4
Follow the instructions on the set-up
screen.
Type 2: Secured network without
Wi-Fi protected Set-up (WPS)
To set up a wireless LAN, SSID (wireless
network name) and security key (WEP or WPA
key) will be required. If you do not know them,
consult the instruction manual of your router.
1
Press HOME, then select
>
“Network” > “Network Set-up”.
2
Select “Wireless Set-up”.
3
Select “Scan”, then select a network
from the list of scanned wireless
networks.
4
Follow the instructions on the set-up
screen.
~
• If you use WPS for network set-up, the security
settings of the wireless LAN router activate, and any
equipment previously connected to the wireless
LAN in a non-secure status will be disconnected
from the network.
In this case, activate the security settings of the
disconnected equipment and then reconnect. Or, you
can deactivate the security settings of the wireless
LAN router, and then connect the equipment to a
TV in a non-secure status.
(Continued)
19
GB