AEG PMR Voxtel R200 Quick Start Manual page 5

3.2 Installing the belt clip
Slide the belt clip into the slot
as shown in Fig. 2.
>A "click" indicates the belt
clip is locked into its position.
3.3 Installing the batteries (see P3)
Caution:
Observe the proper battery polarity orientation when installing
batteries. Incorrect positioning can damage both the batteries and
the unit.
Slide down the battery compartment cover.
Insert the rechargeable batteries by following the orientation as
shown in P3.
Replace the battery compartment cover.
Important:
Read these safety warnings before you charge the batteries.
Don't try to recharge non-rechargeable batteries.
Make sure the battery compartment cover is securely locked in place
when you are charging the batteries.
Dispose of used batteries safely and in a way that will not harm the
environment, never try to burn them or put them anywhere, they
could get burnt or punctured.
Don't leave dead batteries in your PMR units. They might leak if you
do.
3.4 Charging the batteries
3.4.1 With duo charger (model R210/R220) (see P4)
Insert the small plug on the end of the mains adaptor into the power-
in connection jack at the back of the desktop charger.
AEG R200_V1.indd 5
5
Belt clip latch
Fig. 1 Fig. 2
29/06/2012 21:43:30