Schematic Diagram -Amp Section - Sony xm-752eqx Service Manual

3-3. SCHEMATIC DIAGRAM — AMP SECTION — • Refer to page 23 for IC Block Diagrams.
(Page 20)
– 13 –
Note:
• All capacitors are in µF unless otherwise noted. pF: µµF
50 WV or less are not indicated except for electrolytics
and tantalums.
• All resistors are in Ω and
1 / W or less unless otherwise
4
specified.
• % : indicates tolerance.
• 2 : nonflammable resistor.
• U : B+ Line.
• V : B– Line.
– 14 –
XM-752EQX
• Power voltage is dc 14.4V and fed with regulated dc power
supply from +12V and REMOTE terminals.
• Voltage is dc with respect to ground under no-signal
condition.
• Voltages are taken with a VOM (Input impedance 10 MΩ).
Voltage variations may be noted due to normal produc-
tion tolerances.
• Signal path.
F : AUDIO