Disassembly & Reassembly; Overall Disassembly & Reassembly - Samsung YP-R1 Service Manual

3. Disassembly & Reassembly
3-1 Overall Disassembly & Reassembly
- Please follow the disassemble sequence describes below. Otherwise, the product may be
damaged.
- Be sure to carefully read and understand the safety instructions describes at the start of this
manual before performing any work on the IC chips on the PCB.
- To assemble, follow the below instructions in reverse order.
No.
1 1) Insert a flat screwdriver or tweezers into the hole
shown on the right. Remove the cover attached with
double sided tape.
Be careful not to make any scratches as you remove
the cover.
2 1) Remove the two screws using a phillips screwdriver,
and remove the SUS BRACKET.
3 1) Disconnect the case from the main body by pulling the
AL CASE down.
4 1) Remove the screw from the MAIN PCB.
Samsung Electronics
Description
Disassembly & Reassembly
Description Photo
3-1