8
ASSEMBLING AND PREPARING
Adjusting the angle
1
Place the monitor mounted on the stand base
in an upright position.
22MB67PY
2
Adjust the angle of the screen. The angle of the
screen can be adjusted up to 5° forwards and
20° backwards for a comfortable viewing expe-
rience.
Rear Side
24MB67PY
27MB67PY
2
Adjust the angle of the screen. The angle of the
screen can be adjusted up to 5° forwards and
35° backwards for a comfortable viewing expe-
rience.
Rear Side
y
y
Front Side
Adjusting the stand height
1
Place the monitor mounted on the stand base
2
Remove the tape attached at the bottom rear of
Front Side
WARNING
To avoid injury to the fingers when adjusting
y
the screen, do not hold the lower part of the
monitor's frame as illustrated below.
Be careful not to touch or press the screen
y
area when adjusting the angle of the monitor.
in an upright position.
the stand body, then pull out the locking pin.
Stand Body
Tape
Locking Pin