LG 22MB67PY Owner's Manual page 13

NOTE
If you use DP, it can cause compatibility
y y
problem.
When you want to use two PC in our Monitor,
y y
please connect the signal cable(D-SUB/
DVI-D/DP) respectively in Monitor set.
If you turn the Monitor set on while it is cold,
y y
the screen may flicker. This is normal.
Some red, green, or blue spots may appear
y y
on the screen. This is normal.
CAUTION
Connect the signal
y y
input cable and tighten
it by turning the screws
clockwise.
Do not press the screen
y y
with your finger for a long time as this may
result in temporary distortion on the screen.
Avoid displaying a fixed image on the
y y
screen for a long period of time to prevent
image burn. Use a screensaver if possible.
USING THE MONITOR SET
Self Image Setting Function
Press the power button on the bottom panel to
turn the power on. When monitor power is turned
on, the "Self Image Setting" Function is executed
automatically. (Only supported in Analog Mode)
NOTE
"Self Image Setting" Function.
y y
This function provides the user with optimal
display settings.When the user connects
the monitor for the first time, this function
automatically adjusts the display to optimal
settings for individual input signals.(Only
supported in Analog Mode)
'AUTO' Function.
y y
When you encounter problems such as
blurry screen, blurred letters, screen flicker
or tilted screen while using the device or
after changing screen resolution, press the
AUTO function button to improve resolution.
(Only supported in Analog Mode)
13