Download  Print this page

Timers And Clock; Sleep Timer; Clock; Auto Switch Off - Philips 32PFH4009 User Manual

Hide thumbs

Advertisement

3. Press , repeatedly if necessary, to close the menu.
9

Timers and clock

9.1

Sleep timer

With the sleep timer, you can set the TV to switch to standby
automatically after a preset time.
To set the sleep timer . . .
1. Press  and select Setup and press OK.
2. Select TV settings > General settings > Sleep timer.
With the slider bar you can set the time to up to 180 minutes in
increments of 5 minutes. If set to 0 minutes, the sleep timer is
switched off.You can always switch off your TV earlier or reset
the time during the countdown.
3. Press , repeatedly if necessary, to close the menu.
9.2

Clock

To know what time it is, press  TV GUIDE to find the time in
the TV guide.
In some countries, digital broadcasts do not send UTC -
Coordinated Universal Time information. The daylight saving
change might be ignored and the TV might show an incorrect
time.
To correct the TV clock . . .
1. Press  and select Setup and press OK.
2. Select TV settings > General settings > Clock > Auto clock
mode and select Country dependent.
3. Select Daylight saving and select the appropriate setting.
9.3

Auto switch off

If you do not press a key on the remote control during a 4 hour
period, or if the TV receives no input signal nor remote control
commands for 10 minutes, the TV switches off automatically to
save energy.
If you use the TV as a monitor or use a digital receiver to watch
TV (a Set-top box - STB) and you do not use the remote
control of the TV, you should deactivate the automatic switch
off.
To deactivate the Auto switch off . . .
1. Press  and select Setup and press OK.
2. Select TV settings > General settings > Auto switch off and
set the slider bar to 0 (Off).
26

Advertisement

Table of Contents

   Also See for Philips 32PFH4009

   Related Manuals for Philips 32PFH4009

This manual is also suitable for:

32phh400932pht400940pfh400940pft400950pfh400950pft4009

Comments to this Manuals

Symbols: 0
Latest comments: