Operation Instructions - Telefunken TTV-21N02 Instructions For Use & Care

Turn the TV set on at the main switch, the power indicator will light up. In Standby
on, p ress the program up or down button on the TV set, or press the On/Off button on the Remote Control.
The picture will appear after a few seconds . If tuned in, the program number(channel) is displayed on the
top right hand corner of the screen.
MENU BUTTON
1.Press this button to select menu. PRESET, PICTURE, SYSTEM and TIME menu can be selected
cyclically.
Preset Menu Picture Menu
2.After you enter each menu, you can select the item you wish to adjust by pressing PROG.+/- buttons,
and adjust the item by using VOL. +/- buttons.
*The item which you select will change blue.
Preset menu
PRESET
CHANNEL 00
SKIP OFF
BAND V-L
ASM.SIF 6.5M
FINE
SEARCH
ASM
Picture menu
PICTURE
BRIGHTNESS
CONTRAST
COLOR
SHARPNESS
TINT
35

OPERATION INSTRUCTIONS

System Menu
1. CHANNEL
In this function, you can store the channel number you are watching , and
change the channel by pressing the VOL+/- buttons (or the number keys).
2. SKIP
To set the SKIP function on, press the VOL+/- buttons to select as desired.
3. BAND
You can select V-L, V-H or UHF.
4. ASM.SIF
You can select 6.0M, 4.5M, 6.5M or 5.5M ,Australia is 5.5M.
5. FINE
Use to fine tune weak stations by pressing VOL.+/-.
6. SEARCH(Manual Tune)
Press VOL.+/- Buttons to start searching. The VOL- button searches for lower-
numbered channels; the VOL+ button for higher-numbered channels. When a
TV station signal is received ,the searching will stop.
7. ASM(Auto Tune)
Press VOL.+/- Buttons, then the TV set will automatically search from V-L band
to U band.
You can select BRIGHTNESS, CONTRAST, COLOR, SHARPNESS, and TINT
item by PROG.+/- Buttons , and adjust the item which you select by
VOL.+/- Buttons.
*TINT is displayed only for NTSC and is not available for PAL or SECAM.
-7-
" " Mode to turn the TV
Time Menu Exit Menu