Child Lock Function; High Temperature Alarm; Door Open Alarm - AEG A72200GSW0 User Manual

Table of Contents

Advertisement

Available languages

Available languages

28
Control panel
1.
Press the Mode button until the Minute Minder indicator flashes.
2.
Press the OK button to confirm.
3.
The Minute Minder indicator goes off.
It is possible to change the time during the countdown and at the end by pressing the Tem-
perature colder button and the Temperature warmer button.

Child Lock function

To lock the buttons from unintentional operation select the Child Lock function.
To switch on the function:
1.
Press the Mode button until the corresponding icon appears.
2.
The Child Lock indicator flashes.
3.
Press the OK button to confirm.
The Child Lock indicator is shown.
To switch off the function:
1.
Press the Mode button until the Child Lock indicator flashes.
2.
Press the OK button to confirm.
3.
The Child Lock indicator goes off.

High temperature alarm

Temperature increase in the freezer compartment (for example due to an earlier power fail-
ure or door is open) is indicated by:
• flashing the alarm and freezer temperature indicators
• sounding of buzzer.
To reset the alarm:
1.
Press any button.
2.
The buzzer switches off.
3.
The freezer temperature indicator shows the highest temperature reached for a few
seconds. Then show again the set temperature.
4.
The alarm indicator continue to flash until the normal conditions are restored.

Door open alarm

An acoustic alarm will sound if the door is left open for a few minutes. The door open alarm
conditions are indicated by:
• flashing alarm indicator
• acoustic buzzer.
When normal conditions are restored (door closed), the alarm will stop.
During the alarm phase, the buzzer can be switched off by pressing any button.

Advertisement

Table of Contents
loading

Table of Contents