If three or more Bluetooth devices (e.g. a phone and separate audio player) are connected, they may
not work properly.
Turn on the Bluetooth function of the device.
to display the phone menu.
Turn the M.C. dial to select [BT SETTING], then press to confirm.
Turn the M.C. dial to select [ADD DEVICE], then press to confirm.
The unit starts to search for available devices, then displays them in the device list.
• To cancel searching, press the M.C. dial.
• If the desired device is not in the list, select [RE-SEARCH].
• If there is no device available, [NOT FOUND] appears in the display.
Turn the M.C. dial to select a device from the device list, then press to confirm.
Press and hold the M.C. dial to switch the displayed device information between the
Bluetooth device address and device name.
Select [Pioneer BT Unit] shown in the device display.
Make sure the same 6-digit number appears on this unit and the device, then
select "Yes" on the device.
• [DEVICE FULL] appears if the unit has already been paired with three other devices. In this case, delete
one of the paired devices. See [DEL DEVICE] or [GUEST MODE] in the Bluetooth settings (page 10).
• Depending on the device, the PIN code is required in step 7. In this case, input .
The Bluetooth connection can be also made by detecting the unit from the Bluetooth device. To do so,
[VISIBLE] in the Bluetooth settings needs to be set to [ON]. For details on a Bluetooth device operations,
refer to the operating instructions supplied with the Bluetooth device.
Display the list of paired Bluetooth devices. "*" appears on the
device name when the Bluetooth connection is established.
Delete the device information.
Register a new device.
Select [ON] to connect to a Bluetooth device automatically.
Select [ON] so that a Bluetooth device can detect the unit when
the unit is connected via Bluetooth to another device.
Change the PIN code.
1 Press the M.C. dial to display the setting mode.
2 Turn the M.C. dial to select a number.
3 Press the M.C. dial to move the cursor to the next position.
4 After inputting the PIN code, press and hold the M.C. dial.
After inputting the PIN code, pressing the M.C. dial returns you
to the PIN code input display, and you can change the PIN code.
Switch the device information on the display between the
device name and Bluetooth device address.
Select [ON] to move to the [DEL DEVICE] screen automatically
when the unit has already been paired with three devices.
Select [ON] to pair the unit and iPhone automatically when an
iPhone is connected to the unit via USB. (This function may not
be available depending on the version of iOS you are using.)
First, make a Bluetooth connection with the Bluetooth telephone (page 10). Up to two
Bluetooth telephones can be connected simultaneously.
• Leaving the unit on standby to connect to your phone via Bluetooth while the engine is not running
can drain the vehicle's battery.
• Be sure to park your vehicle in a safe place and apply the parking brake before operation.
To make a phone call
to display the phone menu.
When two phones are connected, a phone name appears first then a phone menu
will display. To switch to another phone, press