Initial Setup; Automatic Jam Clearance - Rexel AUTO+ 750X Starting Manual

Hide thumbs Also See for AUTO+ 750X:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

1. initial setup

Intelligent Self Oil: The shredder is designed to automatically lubricate the cutting mechanism as
required to ensure the product continues to work to its maximum performance and to extend the
product life. Please follow the operation instruction before turning on the shredder for the first time.
The 60ml bottle of oil* is sufficient to allow the shredder to start for the first time and to operate
continuously for about one hours shredding before the reservoir will need refilling. When the 'Oil
Refill' indicator is illuminated (
bottle of standard Rexel oil (1760049)*. The automatic oiling operation (
two seconds and you will hear the distribution pump during this time. Auto-oiling operates after 15
minutes of shredding time.
bin or loading door open safety function
As a safety precaution, if the bin or loading door is opened during shredding, the shredder will stop
and the bin full indicator will illuminate (
jam free technology in manual feed slot
Sensors in the paper feed area measure the thickness of paper about to be shredded. The
ability to shred or not is communicated through red and green lighting. Green means that the
stack of paper is within the shredders sheet capacity and OK to shred. Red means that you
have too much paper, remove some sheets in order to shred.
Given that you are unable to shred more sheets of paper than the shredder is capable of
shredding, paper jams are prevented.
This prevents wasting time reversing paper and unblocking jams not to mention the mess it
can create.
intelligent help
1
In the unlikely event of the shredder jamming, the Auto+ 750X and 750M will stop shredding,
and the jam icon will blink in orange.
2
The shredder will illuminate the FWD (
to clear the jam.
3
If the jam cannot be intelligentally cleared, the jam icon (
open the auto feed chamber to clear any jammed material.

automatic jam clearance

Intelligent Jam Clearance: In the unlikely event of the shredder jamming, the Auto+ 750X and 750M
will automatically reverse and forward the engine three times to clear a jam. During this operation
the Paper Jam indicator will flash (
* ACCO Brands Europe accepts no liability for product performance or safety when other types or brands of lubricants are used on
any part(s) of this machine.
), flip up the oil reservoir cap and refill the oil reservoir using a
).
) and REV (
).
) last approximately
) buttons in the sequence necessary
) will illuminate in red. At this point
A U T O + 7 5 0 X & 7 5 0 M
S H R E D D E R S
GB
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Auto+ 750m

Table of Contents