Toro 71185 Operator's Manual page 38

Maintenance
13. Remove the mower belt from the lower engine
pulley (Fig. 41). If you are careful, you can flex
the belt guide(s) just far enough away from the
pulley to remove the belt. If it is too difficult to
remove the belt, loosen the bolts and nuts
securing the belt guides.
IMPORTANT: Do not bend the belt guide(s)
away from the pulley because the belt will not
operate properly when the mower is installed
later.
3
1
Figure 41
Top View
1. Mower belt
2. Engine pulley
14. Turn the front wheels fully to the left. Slide the
mower out to the right to complete removal.
36
2
3
1890
3. Belt guides