Installation; Power; Warning; Service - NEC NLT-32HDB4 Owner's Manual

Installation

Power

This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover.
In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs.

Warning

To prevent fire or shock hazard, do not expose the set to rain or moisture. Do not rub or strike the
LCD with anything hard as this may scratch, mar, or damage the Active LCD permanently.

Service

Never remove the back cover of the set as this can expose you to very high voltage and other hazards.
If the set does not operate properly, unplug it and call NEC Service centre.

Aerial

Connect the aerial cable to the socket marked ATV/DTV Tuner on the back cover. For the best reception
an outdoor aerial should be used.

Location

Position your set so that no bright light or sunlight falls directly onto the screen. Care should be taken
not to expose the set to any unnecessary vibration, moisture, dust or heat. Also ensure that the set is
placed in a position to allow a free flow of air. Do not cover the ventilation openings on the back cover.

Cleaning

Unplug the set before cleaning the face of the LCD Screen. Dust the set by wiping the screen and the
cabinet with a soft, clean cloth. If the screen requires additional cleaning, use a clean, damp cloth. Do
not use liquid cleaners or aerosol cleaners.

Wall Mount: Horizontal Installation

When mounting the product on wall or ceiling, be sure to install the product using the designated
mounting tool according to the method recommended by the manufacturer.
4