Programming - Miele KM 6629 Operating And Installation Instruction

Programming

You can programme certain settings on
the hob to suit your personal needs.
Several settings can be changed in suc-
cession.
After accessing programming mode,
the  symbol and  will appear in the
timer display. After a few seconds, :
(Programme 01) will flash alternately
with : (Code) in the timer display.
46
To access programming mode
 With the hob switched off, touch
the  and  sensors at the same
time until the  symbol and  ap-
pear in the timer display.
To set the programme
 Touch the  sensor repeatedly until
the programme number you want ap-
pears in the appropriate number on
the numerical keybank.
For a two digit programme number
you need to first set the tens position
using the numerical keybank.
To set the code
 Touch the  sensor repeatedly until
the Code you want appears in the
display or touch the appropriate num-
ber on the numerical keybank.
To save the settings
 While the programme is showing in
the display (e. g. :) touch the 
sensor until the indicators go out.
To avoid saving the settings
 Touch the  sensor until the indicat-
ors go out.