HP Z228 Maintenance And Service Manual page 21

Table of Contents

Advertisement

Enable the power-on password prompt during system restarts (warm boots) as well as during power-
on.
Establish a setup password that controls access to Computer Setup (f10) Utility and the settings
described in this section.
Secure integrated I/O functionality, including the serial or USB ports, audio, or embedded NIC, so that
they cannot be used until they are unsecured.
Enable or disable removable media boot ability.
Solve system configuration errors detected but not automatically fixed during the Power-On Self-Test
(POST).
Replicate the system setup by saving system configuration information on a USB device and restoring it
on one or more computers.
Execute self-tests on a specified ATA hard drive (when supported by drive).
Enable or disable DriveLock security (when supported by drive).
Computer Setup (f10) Utility
11

Advertisement

Table of Contents
loading

Table of Contents