Configuring Settings for Multi Control
Assign an individual ID to your product.
3.1.1 Configuring settings for Multi Control
Connection Using the RS232C Cable
Downloaded From TV-Manual.com Manuals
MDC (Multiple Display Control) is an application that allows you to easily control multiple display
devices simultaneously using a PC.
This product can only be controlled by using the remote control.
on the remote control.
to move to
Assign an ID to a set. (Range: 00~99)
to select a number, and press [
Enter the ID number of the product connected to the input cable for input signal reception.
Enter the number you want using the number buttons on the remote control.
Connect the RS232C cable to [RS232C IN] on the product and RS232C OUT on the PC.
and press [
3 Using MDC