Samsung 400BX User Manual page 63

2
Source AutoSwitch Settings
Configuring Source AutoSwitch Settings
1
2
3
4
Downloaded From TV-Manual.com Manuals
Connecting and Using a Source Device
Turning on the display with
active, the display will automatically search the different video input sources for active video.
If the display TV source is active (TV tuner connected to the display) the
function becomes inactive. The display will remain in the TV source.
This product can only be controlled by using the remote control.
Press MENU on the remote control.
Press / to move to Input
Press / to move to Source AutoSwitch Settings
Press / to move to Source AutoSwitch
Source AutoSwitch
When the Source AutoSwitch
active video.
The Primary Source selection will be activated, if the current video source is not recognized.
Secondary source selection will become active, if no primary video source is available.
If both the primary and secondary input sources are not recognized, the display will perform two
searches for an active source, each search checking the primary and then secondary source. If
both searches fail, the display will return to the first video source and display a message
indicating that there is no signal.
When the Primary Source
inputs twice in sequence looking for an active video source, returning back to the first video
source in the sequence if no video is found.
S o u r c e A u t o S w i t c h S e t t i n g s
S o u r c e A u t o S w i t c h
P r i m a r y S o u r c e
S e c o n d a r y S o u r c e
M o v e
Press / to select the option you want and press [
Source AutoSwitch On, and the previous video source selection is not
and press [ ].
and press [
and press [
is On, the display video source will automatically be searched for
selection is set to All, the display will search all the video source
:
:
:
E n t e r
2 Connecting and Using a Source Device
Source AutoSwitch
].
].
O f f
A l l
P C
R e t u r n
].
search
63