Important: Upon activation, any current Wi-Fi connection to an access point is terminated.
Connect to Sprint Hotspot
1. Enable Wi-Fi on your target device (laptop, media device, etc.).
2. Scan for Wi-Fi networks from the phone and select your hotspot from the network list.
The network name for Sprint Hotspot on your phone will be in the form of SPH-L710XXX.
l
("XXX" represents a three-digit number unique to your phone.) You can change the name by
tapping Configure from the Sprint Hotspot screen.
3. Select this phone and follow your onscreen instructions to enter the passkey (provided on the
Sprint Hotspot page).
4. Launch your Web browser to confirm you have an Internet connection.
Adjust Your Sprint Hotspot Settings
1. Press
and tap
2. Tap Configure for options, including Network (SSID), device visibility (Hide my device),
Security [Open or WPA2 PSK], Password, password visibility (Show password), and other
advanced options.
3. Tap Save to store the new hotspot settings.
Bluetooth
Use Bluetooth to share information with other devices, or to connect to other devices, such as
headsets.
Turn Bluetooth On or Off
The following procedures will guide you through turning on and turning off your Bluetooth phone.
1. Press
and tap
2. Tap ON/OFF beside Bluetooth to turn Bluetooth on.
Tip: You can also turn Bluetooth on and off through the Notification panel. Drag the Notification
panel down and tap Bluetooth to enable or disable Bluetooth.
Note: Turn off Bluetooth when not in use to conserve battery power, or in places where using a
wireless phone is prohibited, such as aboard an aircraft and in hospitals.
Web and Data
> Settings > Connections > Hotspot.
> Settings > Connections > Bluetooth.
73