Page 1
Compact Disc Player DX-7355 Instruction Manual Thank you for purchasing an Onkyo Compact Disc Player. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new Compact Disc Player.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING QUALIFIED PERSONNEL.
5. Never Touch this Unit with Wet Hands—Never handle this unit or its power cord while your hands are wet or damp. If water or any other liquid gets inside this unit, have it checked by your Onkyo dealer. 6. Handling Notes •...
We, ONKYO EUROPE ELECTRONICS GmbH LIEGNITZERSTRASSE 6, 82194 GROEBENZELL, GERMANY declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the corresponding technical standards such as EN60065, EN55013, EN55020 and EN61000-3-2, -3-3. GROEBENZELL, GERMANY ONKYO EUROPE ELECTRONICS GmbH K.
❑ 25 Track Programming ❑ Hi-Rigidity, Anti-Resonant Chassis ❑ Aluminium Front Panel ❑ RI-Compatible Remote Control * VLSC and the VLSC logo are registered trademarks of Onkyo Corporation. Supplied Accessories Make sure you have the following accessories: Audio cable (80 cm) cable (80 cm) •...
RC-686C Remote Controller ...9 Installing the Remote Controller’s Batteries ...10 Using the Remote Controller ...10 About CDs ...11 Connections Connecting the DX-7355 ...13 Audio Connections ...13 Connections ...14 Operation Before Using the DX-7355...15 Setting the Voltage Selector (Worldwide models only)...15 Turning On the DX-7355...15...
The page numbers in parentheses show where you can find the main explanation for each item. Front Panel POWER switch (15) Press to turn on/off the DX-7355. REPEAT button (24) Press to set the repeat playback or 1-repeat playback mode.
(Remote Interactive) jacks can be connected to the Onkyo components for interactive control. To use , the DX-7355 must be connected with an cable and an audio cable. TOTAL & REMAIN indicators Illuminate when the remaining time is shown. (Only when audio CD is loaded;...
Remote Controller RC-686C Remote Controller The page numbers in parentheses show where you can find the main explanation for each item. Number buttons (17, 20) Use to enter track numbers. DIMMER button (17) Press to adjust the display brightness. The bright- ness changes in this order: Normal Dimmer...
• Flat batteries should be removed as soon as possible to prevent damage from leakage or corrosion. Using the Remote Controller To use the remote controller, point it at the DX-7355’s remote control sensor, as shown. Remote control sensor Approx.
• Don’t use discs that have residue from adhesive tape, rental discs with peeling labels, or discs with custom- made labels or stickers. Doing so may damage the DX-7355 and you may not be able to remove the disc properly. Discs Made on Personal Computers...
Page 12
About Playing Copy-controlled CDs Some copy-controlled CDs may not conform to the offi- cial CD standard. These special discs may not play properly on the DX-7355. Don’t load discs that are not audio discs (e.g., CD-ROMs designed for use with computers), as these may damage your speakers or amplifier.
Caution: To prevent shutter damage, hold the optical Right (red) plug straight when inserting and removing. Note: Do not put anything on top of the DX-7355, as it may interfere with proper ventilation. Connect one or the other Coaxial cable...
See the amplifier’s instruc- tion manual for details. To use you must make an analog audio connection (RCA/phono) between the DX-7355 and your other Onkyo equipment even if they are connected digitally. RCA/phono audio cable To use the -compatible DX-7355’s...
Before Using the DX-7355 • Turn off the power before changing the switch set- tings. • On changing the switch settings, DX-7355 is initial- ized to its factory defaults. Radio presets and other settings are deleted. Turning On the DX-7355...
Playing CDs Press the Open/Close [ ] button to open the disc tray. Place the CD on the tray with the label-side facing up. Place 8 cm CDs in the center of the tray. To start playback, press the Play ] button.
] button to fast-forward, or the Fast Reverse [ ] button to fast-reverse. Displaying CD Information Press the DX-7355 or the remote controller’s [DISPLAY] button (repeatedly) display the following CD information. While playback is stopped TRACK TOTAL REMAIN Total number...
If you don’t select a specific MP3 track or group for playback, all of the MP3 tracks on the CD will be played in numerical order starting with track #1 in parentheses. For the DX-7355, there are two modes for selecting tracks (MP3 files): Navigation mode and All Group mode.
Page 19
[PLAY MODE] button to cancel the mode before pro- ceeding. While playback is stopped, press the [ ] button. The DX-7355 enters All Group mode, and “1-” appears on the display. GROUP Use the [ ]/[ ] buttons to select the other groups.
Alternatively, you can set the DX-7355 so that names containing such charac- ters are displayed as “TRACK n” or “GROUP n,” “n” being the track or group number (see “BAD NAME”...
Various Playback Modes These are the available playback modes: • 1-group playback (Only MP3 CDs) • Random playback • Memory playback By pressing the [PLAY MODE] button, the indicator changes in this order: GROUP MEMORY No play mode display ··· 1-Group Playback (Only MP3 CDs) PLAY MODE Normally, all of the MP3 tracks in all of the groups on...
Various Playback Modes—Continued Memory Playback (For Audio CDs) In memory playback, you can create a playlist of up to 25 tracks. PLAY MODE Memory playback can be set only when the playback is stopped. Press the [PLAY MODE] button repeatedly until the MEMORY indicator appears.
Press the [PLAY MODE] button repeatedly until the MEMORY indicator appears. Press the [ ] button. The DX-7355 enters All Group mode and “1-” appears on the display. Use the [ ]/[ ] buttons to select the group. Press the [ ] button.
Various Playback Modes—Continued Repeat Playback In repeat playback, you can play an entire CD repeat- edly, play one track repeatedly, or combine it with mem- ory playback to play the playlist repeatedly, or random playback to play all of the tracks on the disc in random order repeatedly.
Page 25
JOLIET (USE SVD/ISO9660) This preference applies to MP3 discs in Joliet format and determines whether the DX-7355 reads the SVD data or treats the disc as an ISO 9660 disc. Normally, this pref- erence doesn’t need to be changed.
Can’t find a SETUP menu in need. • If any track has been selected even when the DX-7355 is stopped, you must place it into the full stop state by pressing the [ ] button before you can view all the SETUP menus.
• There’s no RCA/phono analog audio connection. To use between the DX-7355 and your Onkyo AV receiver, even if they are connected digitally. The DX-7355 contains a microcomputer for signal processing and control functions. In very rare situations, severe interference, noise from an external source, or static electricity may cause it to lockup.
Page 28
Units 2102-2107, Metroplaza Tower I, 223 Hing Fong Road, Kwai Chung, N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039 http://www.ch.onkyo.com/ SN 29344396A (C) Copyright 2007 ONKYO CORPORATION Japan. All rights reserved. HOMEPAGE http://www.onkyo.com/ Y0702-2 * 2 9 3 4 4 3 9 6 A *...