Sony FWD-40LX1 Operating Instructions Manual page 73

Flat panel display
Hide thumbs Also See for FWD-40LX1:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 50
Chroma
Select "Chroma" with M/m and press ENTER.
Adjust the chroma with M/m/</, within the range
of MIN (0) to MAX (100), then press ENTER.
M/,: Increases color intensity.
m/<: Decreases color intensity.
While showing two pictures, only the active picture
will be adjusted.
Phase
Select "Phase" with M/m and press ENTER.
Adjust the phase with M/m/</, within the range of
Left (50) to Right (50), then press ENTER.
M/,: Makes the overall picture greenish.
m/<: Makes the overall picture reddish.
While showing two pictures, only the active picture
will be adjusted.
Sharpness
Select "Sharpness" with M/m and press ENTER.
Adjust the sharpness with M/m/</, within the
range of MIN (0) to MAX (10), then press ENTER.
M/,: Increases the sharpness of the image.
m/<: Decreases the sharpness of the image.
While showing two pictures, both pictures will be
adjusted.
Noise Reduct.
Reduces image graininess and color noise.
1
Select "Noise Reduct." with M/m and press
ENTER.
The following menu appears on the screen.
PICTURE/SOUND CONTROL
Adjust Picture
Backlight:
95
Contrast:
70
Brightness:
50
Chroma:
25
Phase:
0
Sharpness:
5
Noise Reduct.:
Off
Off
Cinema Drive:
Low
Auto
Dynamic Picture:
Mid
Off
Color Temp.:
Cool
High
Select
Set
ENTER
2
Select the Noise Reduct. mode with M/m.
Off: The image signal is displayed directly.
Low: Sets the Noise Reduct. processing to low.
Mid: Sets the Noise Reduct. processing to
medium.
High: Sets the Noise Reduct. processing to high.
Exit
MENU
3
Press ENTER to return to the Adjust Picture
menu.
While showing two pictures, both pictures will be
adjusted.
Cinema Drive
Automatically detects a picture shot on a 24 frame
motion-picture film and plays it back maximizing the
characteristics of a motion-picture film.
1
Select "Cinema Drive" with M/m and press
ENTER.
The following menu appears on the screen.
PICTURE/SOUND CONTROL
Adjust Picture
Backlight:
95
Contrast:
70
Brightness:
50
Chroma:
25
Phase:
0
Sharpness:
5
Noise Reduct.:
Off
Cinema Drive:
Off
Auto
Dynamic Picture:
Auto
Off
Color Temp.:
Cool
Select
Set
ENTER
2
Select the Cinema Drive mode with M/m.
Off: Plays back the picture according to its signal.
Auto: Plays back the picture shot on a movie film
maximizing the motion-picture-like
characteristics of the original.
While showing two pictures, only the active
picture will be adjusted.
Dynamic Picture
Enhances contrast by making white brighter and black
darker.
1
Select "Dynamic Picture" with M/m and press
ENTER.
The following menu appears on the screen.
PICTURE/SOUND CONTROL
Adjust Picture
Backlight:
95
Contrast:
70
Brightness:
50
Chroma:
25
Phase:
0
Sharpness:
5
Noise Reduct.:
Off
Cinema Drive:
Auto
Dynamic Picture:
Off
Off
Low
Color Temp.:
Cool
High
Select
Set
ENTER
2
Select the Dynamic Picture mode with M/m.
Off: Disables the Dynamic Picture function.
Low: Set the Dynamic Picture function to low.
High: Set the Dynamic Picture function to high.
Adjusting the Picture
Exit
MENU
Exit
MENU
25
(GB)

Advertisement

Table of Contents
loading

Table of Contents