Download  Print this page

One Stop Gardens CAR WASH NOZZLE 95996 Assembly And Operation Instructions

Car wash nozzle
Hide thumbs
   

Advertisement

car wash nozzle
asseMbly and operation instructions
Due to continuing improvements, actual product may differ slightly from the product described herein.
Visit our website at: http://www.harborfreight.com
to preVent serious injury, read and understand
all warnings and instructions before use.
©
Copyright
2007 by Harbor Freight Tools
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
for technical questions or replacement parts, please call 1-800-444-3353.
Construction
9 Spray Patterns
Overall Dimensions
Inlet Fitting
Aluminum Nozzle Head
Pattern Adjustment Ring
Detergent Tube
Mix-Water Dial
Trigger Lock
Squeeze Trigger
Model
3491 Mission Oaks Blvd., Camarillo, CA 93011

specifications

Aluminum Head with Rubber Nozzle Head Ring.
Hard Rubber Handle.
Jet, Mist, Flood, Flat, Angle, Shower, Fan, Cone, Center.
10" L X 7-1/8" H X 2.69" W
5/16" ID (0.322") Plastic Barb Fitting
2-1/4" L X 2.41" Diameter
2.68" Diameter X 1/2" W (Black Rubber)
3.47" L X 1.93" Diameter
1.52" Diameter X 3/4" H (Gray Plastic)
Markings: Mix & Water
Folding Steel Wire
4.31" L X 7/8" W (Black Plastic)
95996
®
. All rights reserved. No portion of this
®

Advertisement

Table of Contents
loading

  Related Manuals for One Stop Gardens CAR WASH NOZZLE 95996

No related manuals

  Summary of Contents for One Stop Gardens CAR WASH NOZZLE 95996

  • Page 1: Specifications

    car wash nozzle asseMbly and operation instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com to preVent serious injury, read and understand all warnings and instructions before use.
  • Page 2: Assembly Instructions

    You will need this manual for the safety warnings and precautions, assembly, oper- ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover.
  • Page 3: Operation Instructions

    operation instructions With Car Wash Nozzle not connected to water supply, twist the Plastic Soap Con- tainer counterclockwise and remove it from the Handle. Fill with soap to highest level marked on the Plastic Soap Container. It is located roughly 1/2” from the top of the Container. Thread the Plastic Soap Container onto the Handle with clockwise motion, and thread the Car Wash Nozzle onto your water hose at the Hose Connector located at the base of the Handle.
  • Page 4 inspection, Maintenance, and cleaning before each use, inspect the general condition of the Car Wash Nozzle. Check for misalignment or binding of Dials, and any other condition that may affect its operation. If anything abnormal is found, do not use the Nozzle. Pattern Adjustment Ring Plastic Soap Container...