Download Print this page
One for All URC 3050 User Manual
One for All URC 3050 User Manual

One for All URC 3050 User Manual

So easy 3 device

Advertisement

Quick Links

URC 3050
So Easy 3
Features and Functions
The illustration below and chart on the next page describe the
features and functions of the One For All® So Easy 3 Device
universal remote control.
Feature
RED Light (LED)
The LED flashes red to show that the
remote is working.
The TV, VCR and CBL keys are used to
select the home
entertainment device you want to control.
The POWER key operates the same as on
your original remote.
The SETUP key is used to set up your
devices.
The Glow Keys: VOL (Volume), CH
(Channel), and M (Mute) operate the same
as on your original remote. To activate the
"Glow" Feature, you must expose the
Glow Keys to bright light. The length of
time the Glow Keys remain illuminated
will be determined by the length of time
the remote is exposed to bright light.
These keys are also used to enter set-up
codes for your devices.
The REW (Rewind), FF (Fast Forward),
STOP, PLAY, PAUSE and REC (Record)
keys control the same functions as those
found on your VCR remote.
Overview:
Thank you for purchasing the One For All® So Easy 3 Device
universal remote. Before you can use your new
remote, you will need to program it. To do this, you need to tell
the remote what equipment you wish to operate. This is done by
following these three easy steps.
Step 1:
Install two (2) new AAA alkaline batteries.
Step 2:
Look up the code for your TV, VCR or Cable
Box.
Step 3:
Enter the code.
Function

Advertisement

loading

Summary of Contents for One for All URC 3050

  • Page 1 URC 3050 So Easy 3 Features and Functions The illustration below and chart on the next page describe the features and functions of the One For All® So Easy 3 Device universal remote control. Feature Function RED Light (LED) The LED flashes red to show that the remote is working.
  • Page 2 3rd VCR code 1st Cable code 2nd Cable code 3rd Cable Code You will need o ne of these codes to program your One For All Easy 3 Device remote. Step 3: needs two (2) new AAA ® One For All So Easy 3 ®...
  • Page 3 Press and hold SETUP until the red light blinks twice, then release SETUP. Press CH- + CH- + VOL- then press VOL+. As a safety feature on the One For All Device, you must press the REC key twice. World Wide Web: http://www.oneforall.com...
  • Page 4 Jerrold 1114, 1322, 1134, 1131, 1141, 1132, 1214 Memorex 1111 ONE FOR ALL Novaplex 1342 Computime International Ltd. is the Licensee of the ONE FOR ALL NSC 1234, 1311, 1241 USA and Canada. Oak 1122, 1143 Omega 1141 Panasonic 1211, 1242, 1111...

This manual is also suitable for:

One for all 3050man