One for All URC-7560 User Manual & Code Book page 33

Advanced Features
Shifted Learning
You can also learn a function on a key of the ONE FOR ALL
without sacrificing the original ONE FOR ALL function. The
"custom keys" are an ideal location for this. A Shifted
Learning function can also be put on any key EXCEPT the
following: Device keys, Magic key, Number keys.
To install a Shifted Learning function, simply follow steps 1-8
on the previous page. During step 5, press MAGIC one time
before you press the key for where you are placing the
learned function.
To access the shifted function, press Magic and then the key
you have learned on.
To delete a learned feature:
It is possible to delete all learned features or only individual
learned features.
To delete individual learned functions, follow the steps as
outline below.
1. Press and hold MAGIC until the device key blinks twice
(will blink once then twice).
2. Press 976 (the device key will blink twice).
3. Press the device key in which the function will be deleted.
4. Press twice on the learned key which will be deleted
(the device key will blink twice).*
5. If there is another key which you wish to delete, repeat
steps 2-4.
6. The original functions of the ONE FOR ALL 6 will now be
present.
* To delete a Shifted Learned feature, press MAGIC before you
press the learned key to be deleted (during step 4).
To delete all learned functions across all modes:
1. Press and hold MAGIC until the device key blinks twice
(will blink once then twice).
2. Press 980 (the device key will blink four times).
Notes:
- During steps 2-8, you have approximately 10 seconds to conduct each
step. If there is a gap of more than 10 seconds between two steps, you
will have to start over at step number 2.
- If you learn a function on another key besides the "custom keys", the
original ONE FOR ALL feature automatically becomes shifted. You can
press MAGIC then the key to access it (this excludes the Power, Mute,
Channel and Volume keys).
- The Learning feature is mode specific. Therefore you can place one
learned feature per mode on the same key.
- If a Shifted Learned function is placed on the Mute, Channel and Volume
keys then Scan and Colour/Brightness will be sacrificed.
- The ONE FOR ALL 6 can learn approximately 25 functions.
- You can replace a learned function by placing another learned function
on top.
- Learning should not be done in direct sunlight or under incandescent lights.
- Make sure you are using new batteries before following the instructions
above.
- Upon changing the batteries, your learned functions will be retained.
WWW.ONEFORALL.COM
31