Battery Test; System Reset - AEG UPS 10 kVA User Manual

34
6.7

BATTERY TEST

The BATTERY TEST menu allows you to carry out a short discharge
test of the battery. In case the battery is not efficient, the alarm
"A10 – Battery fault" is generated at the end of the test.
BATTERY TEST?
NO
(1x)
BATTERY TEST?
YEAS
SPECIAL
BATTERY TEST
POSSIBLE LOSS OF SUPPLY
This test can affect the continuity of supply to the loads if the battery is
not fully charged.
6.8

SYSTEM RESET

The UPS is equipped with internal protection which will block the system
or some of its sections. The alarm can be cleared and normal operation
can be resumed via the RESET menu. In case the failure persists, the
UPS will return to the previous failure condition. In some cases a RESET
is necessary to simply reset a failure signal, then the UPS will resume
operation.
RESET DEVICE?
NO
(1x)
RESET DEVICE?
YES
SPECIAL
RESET
The value on the second line is ready to
be changed
The parameter is changed. The change
is confirmed by pressing
The value on the second line is ready to
be changed
The value on the second line is ready to
be changed
The parameter is changed. The change
is confirmed by pressing
The system performs a reset and returns
to the previous screen
OMD94016 REV. C
(ENTER)
(ENTER)