The One For All Sleeptimer - One for All Little Easy User Manual & Code Book

The ONE FOR ALL Sleeptimer

Your ONE FOR ALL remote comes with an
internal Sleeptimer function for those devices
which did not come standard with this function.
To use the ONE FOR ALL Sleeptimer:
Making your ONE FOR ALL ready for
Sleeptimer:
1
TV
2
9 7 0
Setting the ONE FOR ALL Sleeptimer:
It is possible to set the timer for 15, 30, 45 or 60
minutes. To do this, first make sure your TV is
switched on. Then,
(:15)
Press the TV key.
Then, press and hold
MAGIC until the red light
blinks twice. Press 970. The
red light will blink twice
again. It is only necessary to
perform steps 1 and 2 once.
Now to set the timer,
continue with the steps
below.
Press and release
MAGIC then POWER. The red
light will blink once which
indicates the timer is set for 15
minutes. To increase the timer,
simply press POWER again (this
must be done within 5
seconds.). The light will blink
twice indicating the timer is set
for 30 minutes (2x 15). You can
press POWER a maximum of
four times which will set the
timer to 60 minutes.
17