Modes Of Operation - Miele TX2070 Operating And Installation Instructions

Modes of operation

Depending on the model of the cooker
hood, the following options are avail-
able:
Extraction mode
The cooking vapours are drawn in by
the cooker hood. The air is then passed
via the vapour plate and cleaned by the
grease filter, then directed outside.
Non-return flap
The non-return flap is designed to pre-
vent the exchange of room and outside
air taking place when the cooker hood
is switched off.
The flap is closed when the cooker
hood is switched off.
When the cooker hood is switched on,
the non-return flap opens for the cook-
ing vapours to be blown directly out-
side.
If the on-site ventilation system does
not have a non-return flap, the non-re-
turn flap supplied must be fitted in the
exhaust socket in the motor unit.
14
Operation with an external mo-
tor
(...EXT model cooker hoods)
Cooker hoods set up for operation with
an external motor have to be connected
to a Miele external motor located in a
suitable position outside the room in
which the cooker hood is installed. The
external motor is linked to the cooker
hood via a connection cable and then
operated using the controls on the
cooker hood.