Troubleshooting - Philips BDP2305 User Manual

Standby information
• When the product remains inactive for
18 minutes, it automatically switches to
standby or networked standby.
• The power consumption in standby or
networked standby is less than 0.5W.
Accessories
• Remote control and batteries
• Quick start guide
• CD-ROM built in multi-lingual user manual
(Continental Europe only)
Laser
• Laser Type (Diode): AlGaInN (BD),
AlGaInP (DVD/CD)
• Wave length: 398nm to 413nm (BD),
645nm to 664nm (DVD), 770nm to
800nm (CD)
• Output power: 1.7mW (BD), 0.19mW
(DVD), 0.25mW (CD)
14 EN

5 Troubleshooting

Caution
•
Risk of electric shock. Never remove the casing of the
player.
To keep the warranty valid, never try to repair
the player yourself.
If you have problems using this player, check the
following points before you request service. If
you still have a problem, register your player and
get support at www.philips.com/support.
If you contact Philips, you will be asked for the
model and serial number of this player. The
model number and serial number are on the
back of this player. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Main unit
The buttons on this player do not work.
• Disconnect this player from the power
supply for a few minutes, and then
reconnect.
Picture
No picture.
• Make sure that the TV is switched to the
correct source input for this player.
No picture on HDMI connection.
• Make sure that the HDMI cable is not
faulty. If it is faulty, replace with a new
HDMI cable.
• On the remote control, press
press "731" (numeric buttons) to recover
picture display. Or wait for 10 seconds for
auto recovery.
• If this player is connected to an
unauthorized display device with an HDMI
cable, the audio and video signals may not
be output.
and then