Table of Contents
Advertisement
18
NOTE
10. Select the Country Code of the country where the Access Point is deployed. Selecting a proper country
is a critical task while configuring the Access Point, as it defines the correct channels of operation and
ensures compliance to the regulations of the selected country. This field is only available for the Typical
Setup Wizard.
11. Select Next to set the Access Point's network mode.
12. The Typical Setup Wizard displays the Network Topology screen to define how the Access Point handles
network traffic.
13. Select an Access Point Mode from the available options.
If designating the Access Point as a Standalone AP, it is recommended
the Access Point's UI be used exclusively to define its device
configuration, and not the CLI. The CLI provides the ability to define more
than one profile and the UI does not. Consequently, the two interfaces
cannot be used collectively to manage profiles without an administrator
encountering problems.
AP 6522M Access Point
Advertisement
Table of Contents
