1. Connect the YVC-1000 audio input terminal (RCA pin) and the XD-V35 receiver with a commercially
available audio cable.
Before connecting the XD-V35 receiver, turn off YVC-1000.
Prepare a proper audio cable for the XD-V35 receiver's connecting terminal.
Unbalanced 1/4 inch audio output connector: "RCA pin plug↔PHONE plug (monaural)" audio cable
Balanced XLR audio output: "RCA pin plug↔XLR (Female)" audio cable
Both of the YVC-1000 audio input terminals (L and R) are connectable.
You can use the external microphone simultaneously with the microphone supplied with YVC-1000, or
the optional microphone (YVC-MIC1000EX). Also, you can use it in combination with an external
Step 2: How to set
To connect the XD-V35 to YVC-1000 for use, you have to change the YVC-1000 settings. Use the
application software "YVC-1000 Configurator" to change the settings.
This manual explains how to change the settings with a PC. Please refer to the YVC-1000 user's manual when
checking difference in operation between a PC and a Mac.
1. Download "YVC-1000_Configurator_XXX.zip" from the following website, and decompress the file.
"XXX" in the file name indicates the version of YVC-1000 Configurator.
2. Connect YVC-1000 and the PC with the supplied USB cable.
3. Double-click "YVC-1000 Configurator.exe" in the decompressed folder.
"YVC-1000 Configurator" starts up. At the initial startup, the "YVC-1000 Licensing Agreement" dialogue
appears. Read the information carefully, then select "Accept all terms of the license agreement" and
Also, when you re-download the latest version of "YVC-1000 Configurator," the "YVC-1000 Licensing
Agreement" dialogue appears at the initial startup.