Getting Started with your Omron HJ720ITC GoSmart™ Pocket
Welcome!
This guide will show you how to set up your Omron Pocket Pedometer (Model HJ‐720IT) to work with
Microsoft HealthVault.
With this guide, you will:
1. Set up your Pedometer device and take a test reading.
2. Get ready to use your Pedometer with HealthVault.
3. Connect your Pedometer to your computer and upload your test reading to HealthVault.
IMPORTANT: If you have not already created your HealthVault account and installed HealthVault
Connection Center, please go to http://healthvault.com/connectioncenter and follow the instructions
Let's get started!
Step 1: Set up your pedometer and accumulate a few steps
IMPORTANT: You will NOT be using the CD included with the device and may set it aside
Open your Pedometer packaging. Remember, you will NOT be using the CD included with the
device and may set it aside.
Remove the device, and batteries from their plastic packaging.
Remove the screw on the battery cover located on the back of main unit and Install the battery
included with the positive (+) side of the battery upward.
Set the time, weight and stride length on your device as described in the instruction manual
pages 12‐15.
NOTE: The display will not change until you have walked for more than 4 or more seconds
Accumulate steps on your Pedometer
o Attach the Pedometer as described in the instruction manual pages 16 and 17.
o Start walking until your Pedometer has accumulated several steps.
Pedometer and Microsoft® HealthVault™
1
.
.