2-50 PERIODIC MAINTENANCE
Periodic Maintenance Procedures
Twist the driver to disconnect the joint lock [A].
Pull [B] the fuel hose joint [C] out of the delivery pipe.
Be prepared for fuel spillage; any spilled fuel must
be completely wiped up immediately.
When the fuel hose is disconnected, fuel spills out
from the hose and the pipe. Cover the hose connec-
tion with a clean shop towel to prevent fuel spillage.
Pull [A] the joint lock [B] on the fuel hose fully as shown.
Insert the fuel hose joint [A] straight onto the delivery pipe.
Push [B] the joint lock [C] until the hose joint clicks.
Push and pull [A] the fuel hose joint [B] back and forth
more than two times and make sure it is locked and
doesn't come off.
Make sure the fuel hose joint is installed correctly
on the delivery pipe or the fuel could leak.
If it comes off, reinstall the hose joint.
Run the fuel hose in accordance with the Cable, Wire and
Hose Routing section in the Appendix chapter.
Install the removed parts.
Start the engine and check the fuel hose for leaks.
manuals search engine