16-70 ELECTRICAL SYSTEM
If an oscillator is unavailable, check the speedometer as
Install the meter unit.
Use the jack to lift the rear wheel.
Special Tool - Jack: 57001-1238
Turn the ignition switch ON.
Turn the rear wheel by hand to see if the speedometer
shows the vehicle speed [A] that corresponds to the wheel
If it does not show properly, inspect the speed sensor and
power to the speed sensor.
If an oscillator is available, check the speedometer as fol-
Connect the terminals in the same way as in the LCD
Connect the oscillator [A] to the terminal . The vehi-
cle speed that corresponds to the input frequency will be
displayed when a short wave form such as the one show
in the diagram is input.
An input frequency of 750 Hz will display about 60
An input frequency of 450 Hz will display about 60
If the meter does not function correctly, replace the
ODO Meter Inspection
Turn the display [A] into ODO.
During the speedometer inspection with an oscillator, ver-
ify that the odometer reading increases.
If it does not increase, replace the speedometer assem-
manuals search engine