16-68 ELECTRICAL SYSTEM
Push the mode select button to CLOCK.
Push the reset button [A] more than 2 seconds, then the
display turns to the HOUR/MINUTE mode [B].
In the HOUR/MINUTE mode, the numbers flash on the
Check that the flashing number changes to the HOUR or
MINUTE display each time the reset button is pushed.
Check that the time can be set in this mode.
If the time cannot be set, replace the speedometer as-
In the HOUR/MINUTE setting mode, push the reset but-
ton [A] again to effect the HOUR setting mode.
The hour display flashes [B] on the display.
Push the mode selector button to set the hour.
In the HOUR setting mode, push the reset button [A]
onece to effect the MINUTE setting mode.
The minute display flashes [B] on the display.
Push the mode selector button to set the minute.
Set the minute, push the reset button [A] to return to the
HOUR/MINUTE setting mode.
Push the mode selector button [B] to complete the time
The clock starts counting the seconds as soon as the
mode selector button is pushed.
manuals search engine