Right Engine Cover
Right Engine Cover Removal
Engine Oil (see Engine Oil Change in the Periodic Main-
Coolant (see Coolant Change in the Periodic Mainte-
Brake Pedal (see Brake Pedal Removal in the Brakes
Right Footboard (see Footboard Removal/Installation in
the Frame chapter)
Muffler (see Muffler Removal in the Engine Top End
Clutch Cable (see Clutch Cable Removal)
Down Tube (see Downtube Removal in the Frame chap-
Coolant Pipe [B]
Clutch Cover Bolts [A]
Turn the release lever [B] toward the rear as shown, and
remove the right engine cover.
The water pipe [C] is removed along with the right engine
Right Engine Cover Installation
Install the dowel pins [A], and replace the cover gasket
with a new one.
Check to see that the washer [B] is in place.
Apply a non-permanent locking agent to the threads of
the right engine cover bolt (L = 50) [C].
Install the seals [A] to the water pipe so that tapered side
[B] facing the engine inside.
Apply a soap and water solution to the seal. Do not apply
a grease or oil to the seal.
Be sure the water pipe installed correctly.
[C] Right Engine Cover Side
[D] Crankcase Side
Torque - Right Engine Cover Bolts: 9.8 N·m (1.0 kgf·m, 87
manuals search engine