Insert the fuel hose joint [A] straight onto the delivery pipe.
Push [B] the joint lock [C] until the hose joint clicks.
Push and pull [A] the fuel hose joint [B] back and forth
more than two times and make sure it is locked and
doesn't come off.
Make sure the fuel hose joint is installed correctly
on the delivery pipe or the fuel could leak.
If it comes off, reinstall the hose joint.
Run the fuel hose correctly (see Cable, Wire and Hose
Routing section in the Appendix chapter).
Install the removed parts.
Fuel Flow Rate Inspection
Be sure the battery is fully charged.
Gasoline is extremely flammable and can be explo-
sive under certain conditions. Make sure the area
is well-ventilated and free from any source of flame
or sparks; this includes any appliance with a pilot
light. Do not smoke. Turn the ignition switch OFF.
Be prepared for fuel spillage; any spilled fuel must
be completely wiped up immediately.
Turn both ignition switch, and engine stop switch OFF.
Wait until the engine cools down.
Open the fuel tank cap [A] to lower the pressure in the
manuals search engine
FUEL SYSTEM (DFI) 3-95