Error Indicators And Troubleshooting Tips - Omron IntelliSense HEM-650 Instruction Manual

SYMBOL
After several seconds
After several seconds
ERROR INDICATORS
CAUSE
Movement during
measurement.
The cuff is not
fastened securely.
Wrist is not in the
correct position.
Batteries are worn.
Cuff
over-inflated.
19
CORRECTION
Press the START/STOP
button to turn the unit off.
Remove the monitor from
your wrist. Refer to
"Taking a Measurement"
on page 14.
Wait 2-3 minutes.
Take another measurement.
Remove the monitor from
your wrist. Refer to
"Applying the Wrist Cuff"
on page 13.
Wait 2-3 minutes.
Take another measurement.
Refer to "Taking a
Measurement" on page 14.
Make sure the wrist
measurement selection is
correct. Refer to page 10.
Replace the two "AAA"
batteries. Refer to
"Battery Installation"
on page 8.
Repair service required.
Refer to the warranty
information on page 22.