Using The Memory Function - Omron HEM-609 Instruction Manual

USING THE MEMORY FUNCTION

Every time you complete a measurement the monitor stores the
blood pressure and pulse rate in the memory. The Blood Pressure
Monitor automatically stores up to 90 measurement values. When 90
sets of measurement values are stored in the memory, the oldest
record is deleted to save the most recent measurement values.
The monitor also calculates an average reading based on the values
of the three most recent measurements taken. If the date and time
is not set, the measurement values will not be stored in the
memory correctly.
TO DISPLAY THE AVERAGE VALUE
1. Press the MEM button. The average value symbol will display
on the screen with the average reading.
TO DISPLAY THE MEASUREMENT VALUES
1. Press the MEM button to display the average
reading on the screen.
Average Value Symbol
14