Page 1
INSTRUCTION MANUAL LARGE FACE SPHYGMOMANOMETER 11-675D and 11-675DNL Models 11-685 and 11-685NL SPHYGMOMANOMETER CERTIFIED mmHg MADE IN JAPAN SPHYGMOMANOMETER CERTIFIED mmHg MADE IN JAPAN...
Page 3
Omron Clock Aneroid (all models): Attach one end of the coiled tube (the end without the metal connector) to the connector on the underside of the Omron Aneroid (Figure 2). Attach the other end of the coiled tube (the end with the metal connector) to the tube from the cuff and bladder (the tube without the bulb assembly).
Page 4
Set the smaller diameter pole to the desired height and tighten the black knob. The floor stand is now complete. To attach the Omron Aneroid to the floor stand, begin by removing the wing nut connecting the aneroid to the wall-mount bracket (Figure 7).