Canon PowerShot G3 X Getting Started page 4

Initial Preparations
( 2 )
4
3
Charge the battery pack.
 Plug the power cord into the charger,
then plug the other end into a power
outlet.
 The charging lamp turns orange, and
charging begins.
 When charging is fi nished, the lamp turns
green. Remove the battery pack.
 For details on charging time and the
number of shots or recording time
available with a fully charged battery
pack, refer to "Specifi cations" in the
downloadable Camera User Guide.
4
Open the cover.
( 1 )
Slide the switch (1) and open the cover

(2).
( 2 )
5
Insert the battery pack.
 Holding the battery pack with the
terminals in the position shown, hold
the battery lock toward (1) and insert
the battery pack toward (2) until the lock
clicks shut.
 If you insert the battery pack facing the
( 1 )
wrong way, it cannot be locked into the
correct position. Always confi rm that the
battery pack is facing the right way and
locks when inserted.
 To remove the battery pack, press the
battery lock in the direction of the arrow.