Table of Contents
Advertisement
Quick Links
Route your systems cables through Cable Ports and out through opening in rear
of Back Post.
Thank you for purchasing an OmniMount product.
Specifications are subject to change without prior notice.
Every effort has been made to provide accurate and error-free assembly and installation. OmniMount
Systems disclaims liability for any difficulties arising from the interpretation of information contained
in these instructions. If OmniMount products are used for purposes other than their original intent,
OmniMount, its distributors and retailers shall not be held responsible or liable for injuries or property
damage, direct, indirect, or consequential, which may arise from the inability to use this product safely,
properly, and in the manner for which it has been designed and manufactured. Warranty does not
apply to products which have been lost, damaged by misuse, abuse, or accident.
OmniMount Systems, Inc.
8201 South 48th Street • Phoenix, AZ 85044-5355
www.omnimount.com
8
P/N 1002697 Rev A 02/2005
Assembly Instructions
Stellar Video Table: G363
•
Three shelf video table
•
Adjustable center shelf
•
Ideal for large LCD/DLP, Plasma TV's
•
Cable management
IMPORTANT: Consult your dealer if you have any questions regarding
the proper assembly of this product.
Advertisement
Table of Contents
Related Manuals for Omnimount Stellar 1002697
Summary of Contents for Omnimount Stellar 1002697
- Page 1 If OmniMount products are used for purposes other than their original intent, OmniMount, its distributors and retailers shall not be held responsible or liable for injuries or property damage, direct, indirect, or consequential, which may arise from the inability to use this product safely, properly, and in the manner for which it has been designed and manufactured.
- Page 2 Components: Description Qty. A Top Glass Shelf B Middle/Bottom Glass Shelves C Main Frame D Back Post E Main Support Legs F Center Support Legs G Center Cross Bar H Long Hex Head Screws Hex Screws Cross Bar Bracket K Center Support Bracket L Self Adhesive Pads M End Caps N Cable Port Covers...
- Page 3 Step 7 Rock table to check that it is level and stable. For unstable condition, unscrew shortest Leveling Foot until table sits level. Peel Self Adhesive Pads (L) from backing paper, and apply to table assembly as indicated by the black dots, as shown in Fig. 7. Note: There should be 5 Adhesive pads applied to each shelf.
- Page 4 Step 3 Install Main and Center Support Legs over brackets on the other side of Main Frame, as shown in Fig. 3. Loosely secure Support Legs to Main Frame with Hex Screws. Fig. 3 Step 4 Attach Center Cross Bar (G) to Center Support Legs with Cross Bar Bracket (J) and Hex Screws, as shown in Fig.
Need help?
Do you have a question about the Stellar 1002697 and is the answer not in the manual?
Questions and answers