Cleaning, Care; Cleaning Motorcycle - KTM 1190 Adventure Owner's Manual

Hide thumbs Also See for 1190 Adventure:
Table of Contents

Advertisement

20

CLEANING, CARE

20.1

Cleaning motorcycle

Note
Material damage Damage and destruction of components by high-pressure cleaning equipment.
When cleaning the vehicle with a pressure cleaner, do not point the water jet directly onto electrical components, connectors, cables,
bearings, etc. Maintain a minimum distance of 60 cm between the nozzle of the pressure cleaner and the component. Excessive pres-
sure can cause malfunctions or destroy these parts.
Warning
Environmental hazard Hazardous substances cause environmental damage.
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Info
If you clean the motorcycle regularly, its value and appearance will be maintained over a long period.
Avoid direct sunshine on the motorcycle during cleaning.
Close off the exhaust system to keep water from entering.
First remove coarse dirt particles with a gentle spray of water.
Spray very dirty areas with a normal motorcycle cleaner and then clean with a brush.
Motorcycle cleaner (
Info
Use warm water containing normal motorcycle cleaner and a soft sponge.
Never apply motorcycle cleaner to a dry vehicle; always rinse the vehicle with
water first.
401061-01
If the vehicle was operated in road salt, clean it with cold water. Warm water
would enhance the corrosive effects of salt.
p. 210)
183

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents