Service Work On The Chassis; Raising The Vehicle With The Center Stand (Option: Center Stand); Removing The Vehicle From The Center Stand (Option: Center Stand) - KTM 1190 Adventure Owner's Manual

13

SERVICE WORK ON THE CHASSIS

13.1

Raising the vehicle with the center stand (Option: Center stand)

Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
Note
Material damage Damage and destruction of components from excessive load.
–
The center stand is only designed for the weight of the motorcycle and the baggage. Do no sit on the motorcycle when it is resting on
the center stand. The center stand or the frame may become damaged and the motorcycle may fall over.
–
Pull the motorcycle up onto the center stand at the grab handles.
13.2

Removing the vehicle from the center stand (Option: Center stand)

Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
–
Stand to the left of the vehicle.
–
Hold the handlebar with your left hand and push the center stand onto the ground with
your right foot.
–
Put your entire weight on arm
left grab handle until the center stand folds out all the way.
602633-10
of the center stand while pulling the vehicle up at the
1
98