Samsung LE19C431 User Manual page 17

White Balance
„
You can adjust the colour temperature for more natural picture colours.
● R-Offset / G-Offset / B-Offset / R-Gain / G-Gain / B-Gain
changing the values of r, G, B. recommended for advanced users only.
● Reset : The previously adjusted white balance will be reset to the factory defaults.
Flesh Tone
„
You can emphasize the pink 'flesh tone' in the picture.
Changing the adjustment value will refresh the adjusted screen.
N
Edge Enhancement → Off / On
„
You can emphasize object boundaries in the picture.
Picture Options
❑
In PC mode, you can only make changes to the
N
Colour Tone → Cool / Normal / Warm1 / Warm2
„
You can select the most comfortable colour tone to your eyes.
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
N
Warm1 or Warm2 is only activated when the picture mode is Movie.
N
Size
„
You can select the picture size which best corresponds to your viewing requirements.
Press the TOOLS button to display the Tools menu. You can also set the size by selecting Tools → Picture Size.
T
● Auto Wide : Automatically adjusts the picture size to the 16:9 aspect ratio.
● 16:9 : Adjusts the picture size to 16:9 appropriate for dvds or wide broadcasting.
● Wide Zoom : Magnify the size of the picture more than 4:3.
● Zoom : Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
● 4:3 : This is the default setting for a video movie or normal broadcasting.
● Screen Fit : Use the function to see the full image without any cut-off when HdMI (720p / 1080i) or Component (1080i) signals
are input.
Depending on the input source, the picture size options may vary.
N
The items available may differ depending on the selected mode.
N
In PC Mode, only 16:9 and 4:3 mode can be adjusted.
N
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
N
Temporary image retention may occur when viewing a static image on the set for more than two hours.
N
Wide Zoom : Press the ► button to Select Position, then press the ENTERE button. Press the ▲ or ▼ button to move the
N
picture up / down. Then press the ENTERE button.
Zoom : Press the ► button to Select Position, then press the ENTERE button. Press the ▲ or ▼ button to move the picture
N
up and down. Then press the ENTERE button. Press the ► button to Select Size, then press the ENTERE button. Press
the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction. Then press the ENTERE button.
After selecting Screen Fit in HdMI (1080i) or Component (1080i) mode: Select Position by pressing the ◄ or ► button. Use the
N
▲, ▼, ◄ or ► button to move the picture.
Reset: Press the ◄ or ► button to select Reset, then press the ENTERE button. You can initialize the setting.
Screen Fit function with HdMI 720p input, 1 line will be cut at the top, bottom, left and right as in the Overscan
If you use the
N
function.
Screen Mode → 16:9 / Wide Zoom / Zoom / 4:3
„
When setting the picture size to Auto Wide in a 16:9 wide Tv, you can determine the picture size you want to see the 4:3 WSS
(Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is
intended for users to select it.
● 16:9 : Sets the picture to 16:9 wide mode.
● Wide Zoom : Magnify the size of the picture more than 4:3.
● Zoom : Magnify the size of the picture vertically on screen.
● 4:3 : Sets the picture to 4:3 normal mode.
This function is available in
N
This function is not available in
N
Colour Tone and Size from among the items in Picture Options.
Auto Wide mode.
PC, Component or HDMI mode.
English - 15
: You can adjust the Colour 'temperature' in the light areas by