Download  Print this page

Picture Options - Samsung PS50C687 User Manual

Hide thumbs


Table of Contents
■ Gamma: Adjust the primary colour intensity.
■ RGB Only Mode (Off / Red / Green / Blue): You can
adjust Colour or Tint (G/R) of Red, Green or Blue for
the picture from an external device (DVD player, home
theatre, etc.).
■ Colour Space (Auto / Native): Adjust the range of
colours available to create the image.
■ White Balance: Adjust the colour temperature for a
more natural picture.
R-Offset / G-Offset / B-Offset: Adjust each colour's
(red, green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each colour's (red,
green, blue) brightness.
Reset: Resets the White Balance to it's default settings.
Interval: Select interval to adjust.
Red: Adjust the red level.
Green: Adjust the green level.
Blue: Adjust the blue level.
Reset: Resets the 10p White Balance to its default
■ Flesh Tone: Emphasize pink "Flesh Tone."
■ Edge Enhancement (Off / On): Emphasize object

Picture Options

In PC mode, you can only make changes to the Colour
Tone, Size and Screen Burn Protection.
Picture Options
Colour Tone
Screen Mode
Digital Noise Filter
MPEG Noise Filter
HDMI Black Level
Film Mode
■ Colour Tone (Cool / Normal / Warm1 / Warm2)
Warm1 or Warm2 will be deactivated when the
picture mode is Dynamic.
Settings can be adjusted and stored for each
external device connected to an input on the TV.
: Normal
: Auto Wide
: 16:9
: Auto
: Auto
: Normal
: Off
U Move E Enter R Return
■ Size: Your cable box/satellite receiver
may have its own set of screen sizes as
well. However, we highly recommend
you use 16:9 mode most of the time.
Auto Wide: Automatically adjusts the
picture size to the 16:9 aspect ratio.
16:9: Adjusts the picture size to 16:9 for DVDs or wide
Wide Zoom: Magnifies the picture size more than 4:3.
Adjusts the Position by using ▲, ▼ buttons.
Zoom: Magnifies the 16:9 wide pictures vertically to fit
the screen size.
Adjusts the Position or Size by using ▲, ▼
4:3 : The default setting for a movie or normal
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and centre
of the screen may cause image retention(screen
burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are inputted.
Depending on the input source, the picture size
options may vary.
The available items may differ depending on the
selected mode.
In PC mode, only 16:9 and 4:3 modes can be
Settings can be adjusted and stored for each
external device connected to an input on the TV.
After selecting Screen Fit in HDMI (1080i / 1080p)
or Component (1080i / 1080p) mode: Adjusts the
Position or Size by using ▲, ▼, ◄, ► button.
If you use the Screen Fit function with HDMI 720p
input, 1 line will be cut at the top, bottom, left and
right as in the overscan function.



Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: