[Rotate Disp.]/[Rotate] - Panasonic DMC-FZ18 Operating Instructions Manual

Advanced (Playback)
1 Press  to select [SLIDESHOW
SETUP] and then press [MENU/
SET].
2 Press  to select [YES] and then
press [MENU/SET].
• You can only record one category slide
show on one card. If a category slide
show has already been recorded, the
message [A CATEGORY SLIDESHOW
ALREADY EXISTS. OVERWRITE?]
appears.
• If there are 1000 or more pictures, you
can make a slide show with up to 999
pictures.
3 Press  to return to the category
playback screen.
• Press [ ] and then press [MENU/SET]
to close the menu.
• You cannot play back motion pictures as a
slide show.
• Still pictures created from a motion picture
(P93) cannot be played back from the
motion pictures category [
playback.
• Pictures that were taken with the
[QUALITY] set to [RAW] cannot be played
using [CATEGORY].
98
VQT1G06
Press [
menu and select the item to set. (P94)
This mode allows you to automatically
display pictures vertically if they were
recorded holding the camera vertically or
rotate pictures manually in 90° steps.
MENU
SET
w Rotate display
(The picture is automatically rotated and
displayed.)
1 Press  to select [ON] and then
press [MENU/SET].
MENU
SET
• The pictures are displayed without
• Refer to P33 for information about how
2 Press [MENU/SET] to close the
menu.
w Rotate
(The picture is rotated manually.)
1 Press / to select the picture
and then press .
] in category
• The [ROTATE] function is disabled
• Motion pictures and protected pictures

[ROTATE DISP.]/[ROTATE]

To display the picture rotated
MENU
] to display the [PLAY] mode
SET
being rotated when you select [OFF].
to play back pictures.
when [ROTATE DISP.] is set to [OFF].
cannot be rotated.
MENU
SET