Samsung LE37C670 User Manual page 16

Basic Features
Picture Options
✎
In PC mode, you can only make changes to the
Tone, Size, Digital Noise Filter and Auto Protection
Time.
Colour Tone
Size
Screen Mode
Digital Noise Filter
MPEG Nosie Filter
HdMI Black level
Film Mode
Colour Tone (Cool / Normal / Warm1 / Warm2)
■
✎
Warm1 or Warm2 will be deactivated when the
picture mode is Dynamic.
✎
Settings can be adjusted and stored for each
external device connected to an input on the TV.
Size : Your cable box/satellite receiver
■
may have its own set of screen sizes as
well. However, we highly recommend
you use 16:9 mode most of the time.
Auto Wide: Automatically adjusts the
picture size to the 16:9 aspect ratio.
16:9 : Adjusts the picture size to 16:9 for DVDs or wide
broadcasting.
Wide Zoom: Magnifies the picture size more than 4:3.
✎
Adjusts the Position by using
Zoom: Magnifies the 16:9 wide pictures vertically to fit
the screen size.
✎
Adjusts the Position or Size by using
4:3 : The default setting for a movie or normal
broadcasting.
-
✎
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and centre
of the screen may cause image retention(screen
burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are input.
✎
NOTE
x
After selecting
Component (1080i/1080p) mode, you may need to
center the picture:
1. Press the ◄ or ► button to select Position.
2. Press the ENTERE button.
3. Press the ▲, ▼, ◄ or ► button to move the
picture.
x
Depending on the input source, the picture size
options may vary.
16
English
Picture Options
: Normal
: Auto Wide
: 16:9
: Auto
: Auto
: Normal
: Off
▼
U Move E Enter R return
▲, ▼ buttons.
TV
@
Screen Fit in HDMI (1080i/1080p) or
x
The available items may differ depending on the
selected mode.
Colour x
In PC mode, only
adjusted.
x
Settings can be adjusted and stored for each
external device connected to an input of the TV.
x
If you use the
►
input, 1 line will be cut at the top, bottom, left and
right as in the overscan function.
■ Screen Mode (16:9 / Wide Zoom / Zoom / 4:3):
Available only when picture size is set to Auto Wide.
You can determine the desired picture size at the 4:3
WSS (Wide Screen Service) size or the original size.
Each European country requires different picture size.
✎
Digital Noise Filter (Off / Low / Medium / High / Auto
■
/ Auto Visualisation): When the broadcast signal is
weak, some static and ghosting may appear. Select one
of the options until the best picture is displayed.
Auto Visualisation: When changing analogue channels,
displays signal strength.
✎
✎
MPEG Noise Filter (Off / Low / Medium / High /
■
Auto): Reduces MPEG noise to provide an improved
picture quality.
✎
HDMI Black Level (Normal / Low)
■
level on the screen to adjust the screen depth.
✎
Film Mode (Off / Auto1 / Auto2)
■
automatically sense and process film signals from all
sources and adjust the picture for optimum quality.
▲, ▼ button.
✎
100Hz Motion Plus (Off / Clear / Standard / Smooth /
■
Custom / Demo) : Removes drag from fast scenes with
a lot of movement to provide a clearer picture.
✎
Blur Reduction: Adjusts the blur reduction level from
video sources.
Judder Reduction: Adjusts the judder reduction level
from video sources when playing films.
Reset: Reset the custom settings.
Auto Protection Time (2 hours / 4 hours / 8 hours
■
/ 10 hours / Off) : If the same image remains on the
screen, Auto Screen Burn Protector will work.
16:9 and 4:3 modes can be
Screen Fit function with HDMI 720p
Not available in PC, Component or HDMI mode.
Only available for analogue channels.
When bar is green, you are receiving the best
possible signal.
Disabled under PC mode.
Available only in HDMI mode (RGB signals).
Available in TV, AV, COMPONENT (480i / 1080i)
and HDMI (480i / 1080i).
If you enable 100Hz Motion Plus, noise may
appear on the screen. If this occurs, set 100Hz
Motion Plus to Off.
: Selects the black
: Sets the TV to